Liquid Tank Filter

Clean room or purification equipment supply.
Peripheral gel seals or top gel seals.
Jelly glue has excellent sealing properties.
Polyurethane gel has good resilience and can bedisassembled for many times.

Description

The liquid tank of the liquid tank of the high efficiency filter without partition is filled with polyurethane two-component gel, and this is used as the installation seal, which is highly reliable and leak-free, and is suitable for on-site leakage detection of DOP dust.

Air supply and exhaust for clean space or purification equipment
Side liquid tank and top liquid tank
Reliable sealing effect
Polyurethane gel has good resilience and can be disassembled and reassembled many times.
Wet and dry double sealing is available for special needs

Materials and conditions of application Frames : Aluminum profiles Spacer : Hot melt adhesive Filter Paper : High Efficiency Fiberglass Filter Paper Seal : PU gel Operating conditions : <80%/100%RH, 40°C

	Overall dimensions	Air volume	Rated inital resistance
Top gel seal HEPA filter	WxHxD(mm)	(m³/h) 0.45m/s	H13(Pa)	H14(Pa)
	610x610x95	600	108	113
	570x1170x95	1080	108	113
	610x610x104	600	73	83
	570x1170x104	108	73	83

	Overall dimensions	Air volume	Rated inital resistance
Side gel seal HEPA fiter	WxHxD(mm)	(m³/h) 0.45m/s	H13(Pa)	H14(Pa)
	610x610x69	525	100	105
	570x1170x69	970	100	105
	610x610x90	525	75	80
	670x670x90	970	75	80
	610x610x117	525	65	70
	570x1170x117	970	65	70

Details Options for Liquid Tank Filter

Gel Seal

Constructed with a built-in channel in the filter frame which contains a non-flowing, non-hardening urethane gel sealant
Designed for framing systems and housings equipped with a “knife edge” seal
Liquid Tank Filter CS with Gel Seal is available with cell side (filter frame) depths of 4 3/4”

Reverse Gel Seal

Constructed with the built-in gel channel located at the back of the upstream side of the filter
Designed for housings and ducted modules equipped with a “knife edge” seal
Excellent replacement filter for permanently installed ducted ceiling modules

Neoprene Gasket Seal

Constructed with a 3/4” wide by 1/4” thick closed cell neoprene gasket
Designed for “lay-in” frame systems requiring filters with gaskets of this type
Standard models are furnished with the gasket on the downstream face of the filter
Liquid Tank Filter CS with Gasket Seal is available with cell side (filter frame) depths of 2 3/4”
Wood cell sides are available upon request